UMN:CLI
User Manual
V5824G
566
To configure the filtering for single-tagged frames, use the following command.
Command
Mode
Description
filter inner vid
{
any
| <0-4094>}
cos
{
any
| <0-7>}
tpid
{
any
|
0x8100
|
input
[
dei
{
0
|
1
}]}
Single-
Tagged-
Frame
Configures the received single-tagged frames to be
filtered by the provided values concerning inner tag.
vid any: do not filter on the inner VID.
vid 0-4094: filters received frames on this value.
cos any: do not filter on the inner priority.
cos 0-7: filters received frames on this value.
tpid any: do not filter on the inner TPID field.
tpid 0x8100: filters received frames on this value.
tpid input: input TPID attribute value, don't care about
DE bit.
tpid input dei 0: input TPID, DE=0
tpid input dei 1: input TPID, DE=1
no filter inner
Deletes the filtering configuration above.
To configure the treatment of filtered single-tagged frames, use the following command.
Command
Mode
Description
treat
{
remove
{
single
|
double
} |
discard-frame
}
Single-
Tagged-
Frame
Configures the treatment of filtered single-tagged
frames.
remove single: removes one tag (the outer tag is
stripped from double-tagged frames.)
remove double: removes all of outer and inner tags.
discard-frame: drops the frames.
treat inner vid
{<0-4094> |
copy-
inner
}
cos
{<0-7> |
copy-inner
|
dscp-to-pbit
}
tpid
{
output dei
{
0
|
1
|
copy-inner
}
|
copy-inner
|
0x8100
}
Configures the inner tag treatment for filtered single-
tagged frames.
0-4094: uses this value as the VID in the inner VLAN
tag.
copy-inner: copies value from inner tag of received
frame.
0-7: uses this value as the priority in the inner VLAN
tag.
treat outer vid
{<0-4094> |
copy-
inner
}
cos
{<0-7> |
copy-inner
|
dscp-to-pbit
}
tpid
{
output dei
{
0
|
1
|
copy-inner
}
|
copy-inner
|
0x8100
}
Configures the outer tag treatment for filtered single-
tagged frames.
no treat
{
remove-discard
|
outer
|
inner
}
Deletes the treatment-related configuration above.
