UMN:CLI
User Manual
V5824G
606
To delete a created multicast access list, use the following command.
Command
Mode
Description
no multicast-access-list
{
NAME
|
all
}
GPON
Deletes a created multicast access list.
NAME: multicast access list name
To modify an existing multicast access list, use the following command.
Command
Mode
Description
multicast-access-list
NAME
modify
GPON
Modifies the existing multicast access list.
NAME: multicast access list name
To display the information of multicast ACL, use the following command.
Command
Mode
Description
show
multicast-access-list
[
NAME
]
GPON
Shows the information currently configured for the
multicast access list.
11.11.6.2
IGMP Access List Configuration
To configure the multicast access list, use the following command.
Command
Mode
Description
igmp access-list vid
{
untagged
|
VLAN
}
dst-ip start
A.B.C.D
end
A.B.C.D
[
bw
VALUE
|
src-ip
A.B.C.D
|
gem
PORT
|
cos
<0-7>]
Multicast-
ACL
Configures the dynamic/static access control list table.
It discards the IGMP join message from ONTs based
on the access list.
VLAN: 1 to 4095, VLAN ID for specific tagged
downstream flow
dst-ip: destination IP address
A.B.C.D: start/end IP address of the multicast group
range
VALUE: imputed group bandwidth (unit: bytes/sec)
src-ip: source IP address
PORT: multicast GEM port ID
igmp
static-access-list
vid
{
untagged
|
VLAN
}
dst-ip start
A.B.C.D
end
A.B.C.D
[
bw
VALUE
|
src-ip
A.B.C.D
|
gem
PORT
|
cos
<0-7>]
To remove the dynamic/static access control list configuration from the multicast access
list, use the following command.
Command
Mode
Description
no igmp
{
access-list
|
static-access-list
}
all
Multicast-
ACL
Removes the dynamic/static access
control list configuration from the
multicast access list.
no igmp access-list vid
{
untagged
|
VLANS
}
dst-ip start
A.B.C.D
end
A.B.C.D
[
bw
VALUE
|
src-ip
A.B.C.D
|
gem
PORTS
]
no igmp static-access-list vid
{
untagged
|
VLANS
}
dst-ip start
A.B.C.D
end
A.B.C.D
[
bw
VALUE
|
src-ip
A.B.C.D
|
gem
PORTS
]