Chapter 8: Using the Command Line Interface
238
Setting the SNMP Read Community
This command syntax sets the SNMP read-only community string.
config:#
network services snmp readCommunity <string>
Variables:
<string> is a string comprising 4 to 64 ASCII printable characters.
The string CANNOT include spaces.
Setting the SNMP Write Community
This command syntax sets the SNMP read/write community string.
config:#
network services snmp writeCommunity <string>
Variables:
<string> is a string comprising 4 to 64 ASCII printable characters.
The string CANNOT include spaces.
Setting the sysContact Value
This command syntax sets the SNMP MIB-II sysContact value.
config:#
network services snmp sysContact <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Setting the sysName Value
This command syntax sets the SNMP MIB-II sysName value.
config:#
network services snmp sysName <value>
Variables:
<value> is a string comprising 0 to 255 alphanumeric characters.
Summary of Contents for PXE
Page 16: ......
Page 339: ...Appendix A Specifications 323 RS 485 Pin signal definition al 4 5 6 D bi direction al Data 7 8...
Page 380: ...Index 364 Z Zero U Products 1...
Page 381: ......
