Chapter 8: Using the Command Line Interface
222
Option
Description
freeForm
Any alphanumeric string can be used for
specifying the Z coordinate.
Note: After determining the format for the Z coordinate, you can set a
value for it. See
Setting the Z Coordinate
(on page 286).
Enabling or Disabling Peripheral Device Auto Management
This command syntax enables or disables the Peripheral Device Auto
Management feature.
config:#
pdu peripheralDeviceAutoManagement <option>
Variables:
<option> is one of the options:
enable
or
disable
.
Option
Description
enable
Enables the automatic management feature for
environmental sensors.
disable
Disables the automatic management feature for
environmental sensors.
For more information, see
Disabling the Automatic Management
Function
(on page 172).
Examples
This section illustrates several PDU configuration examples.
Example 1 - PDU Naming
The following command assigns the name "my px12" to the PDU.
config:#
pdu name "my px12"
Example 2 - Data Logging Enabled
The following command enables the data logging feature.
config:#
pdu dataRetrieval enable
Summary of Contents for PXE
Page 16: ......
Page 339: ...Appendix A Specifications 323 RS 485 Pin signal definition al 4 5 6 D bi direction al Data 7 8...
Page 380: ...Index 364 Z Zero U Products 1...
Page 381: ......