System Configuration and Monitoring Commands
©2008 Allied Telesis Inc. All rights reserved.
8.10
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
show clock
This command displays the system’s current configured local time and date. It also displays
other clock related information such as timezone and summertime configuration.
Syntax
show clock
Mode
Exec and Privileged Exec mode.
Output
Figure 8-1: Example output from the show clock command for a device using New Zealand
time
Parameters in output of the
show clock
command
Examples
To display the system’s current local time, use the command:
awplus#
show clock
Related Commands
clock set
clock summer-time date
clock summer-time recurring
clock timezone
Local Time: Mon, 6 Aug 2007 13:56:06 +1200
UTC Time: Mon, 6 Aug 2007 01:56:06 +0000
Timezone: NZST
Timezone Offset: +12:00
Summer time zone: NZDT
Summer time starts: Last Sunday in September at 02:00:00
Summer time ends: First Sunday in April at 02:00:00
Summer time offset: 60 mins
Summer time recurring: Yes
Parameter
Meaning
Local Time
Current local time.
UTC Time
Current UTC time.
Timezone
The current configured timezone name.
Timezone Offset
Number of hours offset to UTC.
Summer time zone
The current configured summertime zone name.
Summer time starts
Date and time set as the start of summer time.
Summer time ends
Date and time set as the end of summer time.
Summer time offset
Number of minutes that summer time is offset from the system’s
timezone.
Summer time recurring
Whether the device will apply the summer time settings every
year or only once.
