PIM-SM Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
37.5
debug pim sparse-mode timer joinprune
Use this command to enable the PIM-SM JoinPrune timer’s debugging.
Use the
no
parameter with this command to disable the PIM-SM JoinPrune timer’s debugging.
Syntax
debug pim sparse-mode timer joinprune [jt|et|ppt|kat|ot]
no debug pim sparse-mode timer joinprune (jt|et|ppt|kat|ot)
Mode
Configure and Privileged Exec modes
Example
Related Commands
show debugging pim sparse-mode
debug pim sparse-mode timer register
Use this command to enable the PIM-SM register timer’s debugging.
Use the
no
parameter with this command to disable the PIM-SM register timer’s debugging.
Syntax
debug pim sparse-mode timer register [rst]
no debug pim sparse-mode timer register [rst]
Mode
Configure and Privileged Exec modes
Example
Related Commands
show debugging pim sparse-mode
Parameter
Description
jt
Turn on/off PIM-SM JoinPrune timer: upstream Join Timer - jt
et
Turn on/off PIM-SM JoinPrune timer: Expiry Timer - et
ppt
Turn on/off PIM-SM JoinPrune timer: PrunePending Timer - ppt
kat
Turn on/off PIM-SM JoinPrune timer: KeepAlive Timer - kat
ot
Turn on/off PIM-SM JoinPrune timer: Upstream Override Timer - ot
awplus#
debug pim sparse-mode timer joinprunet et
Parameter
Description
rst
Turn on/off PIM-SM Register timer: Register Stop Timer - rst
awplus#
debug pim sparse-mode timer register