QoS Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
40.55
show mls qos interface queue-counters
Display an interface’s egress queue counters. This can either be for a specific queue or for all
queues on the interface. If no queue is specified all queue counters on the interface will be
displayed.
The counters show the number of frames currently in the queue and the maximum number of
frames allowed in the queue, for individual egress queues and the port’s queue (which will be a
sum of all eight egress queues).
Syntax
show mls qos interface <
ifname>
queue-counters queue [<0-7>]
Mode
Exec and Privileged Exec Mode
Example
To show the counters for all queues on port1.0.1 enter the command:
Output
Interface port1.0.1 Queue Counters:
Port queue length 0 (maximum 896)
Egress Queue length:
Queue 0 0 (maximum 112)
Queue 1 0 (maximum 112)
Queue 2 0 (maximum 112)
Queue 3 0 (maximum 112)
Queue 4 0 (maximum 112)
Queue 5 0 (maximum 112)
Queue 6 0 (maximum 112)
Queue 7 0 (maximum 112)
Related Commands
wrr-queue queue-limit
Parameter Description
mls Multi-Layer
Switch
(L2/L3)
qos Quality
of
Service
interface
Select an interface
<ifname>
Interface name
queue-counters Display
queue
counters
queue Select
a
queue
<0-7> Queue
awplus#
show mls qos interface port1.0.1 queue-
counters
Output
Parameter Meaning
Interface
Port we are showing the counters for
Port queue length Number of frames in the port’s queue. This will be the sum of all egress
queues on the port.
Egress Queue
length
Number of frames in a specific egress queue.