IGMP Multicast Commands
©2008 Allied Telesis Inc. All rights reserved.
34.4
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
debug igmp
Use this command to enable debugging of all IGMP, or a specific component of IGMP.
Use the
no
parameter with this command to disable all IGMP debugging, or debugging of a
specific component of IGMP.
Syntax
debug igmp
{
all
|
decode
|encode|
events
|
fsm
|
tib
}
no debug igmp
{
all
|
decode
|
encode|
events
|
fsm
|
tib
}
Modes
Privileged Exec mode and Configure mode
Usage
This command applies to interfaces configured for IGMP, IGMP Snooping, or IGMP Proxy.
Example
ip igmp
Use this command to enable IGMP on an interface. The command configures the device as an
IGMP querier.
Use the
no
parameter with this command to return all IGMP related configuration to the
default on this interface .
Syntax
ip igmp
no ip igmp
Mode
Interface mode
Default
Disabled
Usage
This command will have no effect on IGMP Proxy or IGMP Snooping configuration.
Example
Parameter
Description
all
enable or disable all debug options for IGMP
decode
debug of IGMP packets that have been received
encode
debug of IGMP packets that have been sent
events
debug IGMP events
fsm
debug IGMP Finite State Machine (FSM)
tib
debug IGMP Tree Information Base (TIB)
awplus#
configure terminal
awplus(config)#
debug igmp all
awplus#
configure terminal
awplus(config)#
interface vlan1
awplus(config-if)#
ip igmp