RIP Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
28.21
redistribute
Use this command to redistribute information from other routing protocols into RIP.
Using the
no
parameter with this command will disable the specified redistribution. The
parameters
metric
and
routemap
may be used on this command, but have no effect.
Syntax
redistribute {connected|static|ospf|bgp}[metric <0-16>][routemap
<word>]
no redistribute {connected|static|ospf|bgp}[metric][routemap]
Mode
Router mode
Examples
awplus#configure terminal
awplus(config)#router rip
awplus(config-router)#redistribute static metric 15 route-map Chicago
restart rip graceful
Use this command to force the RIP process to restart.
Syntax
restart rip graceful
[
grace-period
<1-65535>]
Mode
Privileged Exec mode
Usage
After this command is executed, the RIP process immediately shuts down. It notifies the system
that RIP has performed a graceful shutdown. Routes that have been installed into the route
table by RIP are preserved until the specified grace-period expires.
■
When a
restart rip graceful
command is issued, the RIP configuration is reloaded from the
last saved configuration. Ensure you first issue a
copy
running-config startup-config
.
Example
awplus#restart rip graceful grace-period 100
Parameter
Description
metric
metric
<0-16>
Specifies the metric value to be applied to the
redistributed routes
<0-16>
Metric value
routemap
route-map
WORD
Specifies route-map that controls how routes are
redistributed
<word>
The name of the route map
connected
redistribute from connected routes
static
redistribute from static routes
ospf
redistribute from Open Shortest Path First (OSPF)
bgp
redistribute from Border Gateway Protocol (BGP)