IGMP Multicast Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
34.23
ip igmp version
Use this command to set the current IGMP version (IGMP version 1, 2 or 3) on an interface.
To return to the default version, use the
no
parameter with this command.
Syntax
ip igmp version
<1-3>
no ip igmp version
Mode
Interface mode
Usage
This command applies to interfaces configured for IGMP.
Default
The default IGMP protocol version number is 3.
Example
Parameter
Description
<1-3>
IGMP protocol version number
awplus#
configure terminal
awplus(config)#
interface vlan5
awplus(config-if)#
ip igmp version 2