Logging Commands
©2008 Allied Telesis Inc. All rights reserved.
10.16
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
To create a filter to send all messages containing the text "Bridging initialization" to console
instances where the log console command has been given use the command:
awplus(config)# log console msgtext "Bridging initialization"
To remove a filter that sends all messages generated by BGP that have a severity of "notices" or
higher to consoles use the command:
awplus(config)# no log console level notices program bgp
To remove a default filter that includes sending critical, alert and emergency level messages to
the console use the command:
awplus(config)# no log console level critical
Validation
Commands
show log config
Related Commands
log console
log email
Configures the device to send log messages to an email address. The email address is specified
in this command. By default no filters are defined for email log targets. Filters must be defined
before messages will be sent.
Syntax
log email <
to
>
Mode
Configure mode
Examples
To have log messages emailed to the email address admin@alliedtelesis.com use the command:
Validation
Commands
show log config
Related Commands
default log email
log email
Parameter
Description
log
Logging control
Send log messages to an email address
<
to
>
The email address to send log messages to
awplus(config)#
log email admin@alliedtelesis.com