RIP Commands
©2008 Allied Telesis Inc. All rights reserved.
28.14
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
key
Use this command to manage, add and delete authentication keys in a key-chain.
Use the no parameter to delete the authentication key.
Syntax
key KEYID
no key KEYID
Mode
Keychain mode
Usage
This command allows you to enter the keychain-key mode where a password can be set for
the key.
Examples
The following example configures a key number
1
and shows the change into a
keychain-
key
command mode prompt.
awplus#configure terminal
awplus(config)#key chain mychain
awplus(config-keychain)#key 1
awplus(config-keychain-key)#
Related Commands
key chain
key-string
accept-lifetime
send-lifetime
Parameter
Description
KEYID
<0-2147483647>
Key identifier number