RIP Configuration
©2008 Allied Telesis Inc. All rights reserved.
27.10
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
Names of Commands Used
key chain, key, key-string, accept-lifetime, send-lifetime, ip rip authentication key-chain, ip rip
authentication mode
Validation Commands
show run, show ip rip, show ip protocol rip, show ip rip interface
awplus(config-keychain-key)#
key-string Earth
Specify a password (
Earth
) to be used by the
specified key.
awplus(config-keychain-key)#
accept-lifetime
12:00:00 Mar 7 2007 14:00:00 Mar 12 2007
Specify the time period during which authentication
key string
Earth
can be received. In this case, key
string
Earth
can be received from noon of March 7
to 2 pm March 12, 2007.
awplus(config-keychain-key)#
send-lifetime
12:00:00 Mar 7 2007 12:00:00 Mar 12 2007
Specify the time period during which authentication
key string
Earth
can be send. In this case, key string
Secret can be received from noon of March 7 to noon
of March 12, 2007.
awplus(config-keychain-key)#
end
Enter
Privileged Exec
mode.
awplus#
configure terminal
Enter the
Configure
mode.
awplus(config)#
interface port1.0.0
Specify
port1.0.0
as the interface you want to
configure.
awplus(config-if)#
ip rip authentication key
chain MOON
Enable RIPv2 authentication on
port1.0.0
interface and specify the key chain
MOON
to be used
for authentication.
awplus(config-if)#
ip rip authentication mode
md5
Specify authentication mode to be used for RIP
packets.