BGP Commands
©2008 Allied Telesis Inc. All rights reserved.
31.32
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
Software Version 5.2.1
clear ip bgp A.B.C.D
Use this command to reset a IPv4 BGP connection for a specific IP address.
Syntax
clear ip bgp {<
A.B.C.D
>} [<
in
>|out|<
soft
>]
clear ip bgp {<
A.B.C.D
>} ipv4 <
prefix
> <
routes
>
Mode
Privileged Exec mode
Examples
Parameter
Description
<A.B.C.D>
Specifies the IPv4 address of the BGP route to be cleared
ipv4
clears all IPv4 address family peers
<routes>
{
IN
|
out
|
soft
}
<in>
in
[
prefix-filter
]
in
Indicates that incoming advertised routes will be cleared
prefix-filter
Pushes out prefix-list ORF and does inbound soft reconfiguration
out
Indicates that outgoing advertised routes will be cleared.
<soft>
soft [
in
|
out
]
Indicates that both incoming and outgoing routes will be
cleared
<prefix>
{
unicast
|
multicast
}
unicast
address family modifier
multicast
address family modifier
awplus#
clear ip bgp 10.10.0.12 soft
awplus#
clear ip bgp 10.10.0.10 ipv4 unicast out
awplus#
clear ip bgp 3ffe::8