RIP Commands
©2008 Allied Telesis Inc. All rights reserved.
Software Version 5.2.1
AlliedWare Plus
TM
Operating System Software Reference C613-50003-00 REV E
28.15
key chain
Use this command to enter the key chain management mode and to configure a key chain with
a key chain name. Use the no parameter on this command to remove the key chain and all
configured keys.
Syntax
key chain KEYNAME
no key chain KEYNAME
Mode
Configure mode
Usage
This command allows you to enter the keychain mode from which you can specify keys on this
key chain.
Examples
The following example shows the creation of a key chain named
mychain
and the change
into
keychain
mode prompt.
awplus#configure terminal
awplus(config)#key chain mychain
awplus(config-keychain)#
Related Commands
key
key-string
accept-lifetime
send-lifetime
Parameter
Description
KEYNAME
Specify the name of the key chain to manage.