Enter 87 End
*/$%ENTR* *ZEND*
Editing General Settings
6
*
6-3-2.
Set <CMD> Escape Character
In most cases, this parameter is used to specify the position where the command options are
retrieved to execute the modified operations for the specified command line, especially when
you are working with a terminal program to send commands to the scanner. Once <CMD>
escape character is well defined, please properly append the desired and valid command
options to the escape character to achieve the attempt.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
CmdChar
barcode to configure <CMD> escape character.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the appendix
to scan hexadecimal value barcodes representing the desired string which has to be
1 character in length. For instance, to demand a special interpretation for the string
following <CMD> escape character “~”, scan
7
first and then
E
to assign the
specified hexadecimal value “7E”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
*A52E2*
CmdChar
A52E2
(Length: 1 digit)
