Enter 279 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
length variables can have different meanings. With
Min
length condition,
Industrial25Len1
variable represents the minimum size to limit the minimum length of a valid barcode. On the
other hand, with
Min/Max
length condition, the barcode will be decoded only if its length
has to fall within the range of
Industrial25Len1
to
Industrial25Len2
.
In this case,
Industrial25Len1
stands for the minimum and
Industrial25Len2
for the maximum.
However,
Industrial25Len1, Industrial25Len2,
and
Industrial25Len3
can also represent a
group of length limits when
Fixed
length qualification is chosen. It means the scanner will
only decode the barcode with the length which agrees with
Industrial25Len1,
Industrial25Len2, or Industrial25Len3.
. Set Length2 variable
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
Industrial25Len1
barcode to determine the value of the length variable.
(3)
Please refer to Decimal/Hexadecimal Table in the appendix to scan decimal value
barcodes representing the desired number in the range of 0 to 255. For instance, to
set its length to be 8, then scan
8
to assign the specified value “8”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Repeat Steps 2-4 individually for Industrial25Len2 and Industrial25Len3, if
necessary.
(6)
Scan
End
barcode to complete the configuration.
*48501*
Industrial25Len1
48501
*48511*
Industrial25Len2
48511
*48521*
Industrial25Len3
48521
(Length: 1 digit / Range: 0-255)
(Length: 1 digit / Range: 0-255)
(Length: 1 digit / Range: 0-255)
