Enter 212 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
8-8-4.
Configure Length Qualification
With length qualification the scanner will filter out the inappropriate barcodes whose lengths
are out of range. Scan
Min
barcode to specify the minimum length which the valid code at
least has to be;
Fixed
barcode requires the scanned code length to necessarily agree with
certain fixed number
;
Min/Max
barcode is to confirm whether the barcode length falls in
between maximum and minimum. However, to make this parameter work effectively, you
have to configure the length scale simultaneously. Please refer to
Section 8-8-6
for more
details about configurations of the length scale.
8-8-5.
Set Code ID for Code11
A user-defined Code ID functions as an identity for a specific barcode type to be
differentiated from
others. It is especially helpful while you are dealing with more than one
type of barcodes at the same time. Scan the barcode below to customize your own Code ID
for Code11.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
Code11UDSI
barcode to tailor Code ID for Code11 to your needs.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the appendix
to scan hexadecimal value barcodes representing the desired string which has to be
2 characters in length. For instance, to set its Code ID to be “11”, scan
3, 1, 3,
and
then
1
to assign the specified hexadecimal value “3131”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
*4A530*
Min
4A530
*4A531*
Fixed
4A531
*4A532*
Min/Max
4A532
*4AC02*
Code11UDSI
4AC02
(Length: 2 digits)
