configure snmpv3 add group user
ExtremeWare 7.5 Command Reference Guide
149
configure snmpv3 add group user
configure snmpv3 add group [hex <hex value> | <group name>] user [ hex <hex
value} | <user name>] {sec-model [snmpv1| snmpv2 | usm]} {volatile}
Description
Add a user name (security name) to a group.
Syntax Description
Default
The default values are:
•
sec-model—USM
•
non-volatile storage
Usage Guidelines
Use this command to associate a user name with a group.
As per the SNMPv3 RFC, a security name is model independent while a username is model dependent.
For simplicity, both are assumed to be same here. User names and security names are handled the same.
In other words, if a user is created with the user name
username
, the security name value is the same,
username
.
Every group is uniquely identified by a security name and security model. So the same security name
can be associated to a group name but with different security models.
Example
Use the following command to associate the user
userV1
to the group
defaultRoGroup
with SNMPv1
security:
configure snmpv3 add group defaultRoGroup user userV1 sec-model snmpv1
Use the following command to associate the user
userv3
with security model
USM
and storage type
volatile
to the access group
defaultRoGroup
:
configure snmpv3 add group defaultRoGroup user userV3 volatile
hex
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
group name
Specifies the group name to add or modify.
user name
Specifies the user name to add or modify.
sec-model
Specifies the security model to use.
snmpv1
Specifies the SNMPv1 security model.
snmpv2
Specifies the SNMPv2c security model.
usm
Specifies the SNMPv3 User-based Security Model (USM).
volatile
Specifies volatile storage.
Summary of Contents for ExtremeWare 7.5
