Lantronix
SM12XPA Web User Guide
33848 Rev. A
Page
266
of
473
In principle, UMC can be any value in range [1; 127], but this API does not allow for specifying length of
ICC, so the underlying code doesn't know where ICC ends and UMC starts. The Domain Format must be
None.
If Format is
Y1731 ICC CC
, the following applies:
Length must be 15.
First 2 chars (CC): Must be among [A-Z]
Next 1-6 chars (ICC): Must be among [a-z,A-Z,0-9]
Next 7-12 chars (UMC): Must be among [a-z,A-Z,0-9]
There may be ONE (slash) present in name[3-7]. The Domain format must be None.
VLAN
: The MA's primary VID. A primary VID of 0 means that all MEPs created within this MA will be created as
port MEPs (interface MEPs). There can only be one port MEP per interface. A given port MEP may still be
created with tags, if that MEP's VLAN is non-zero.
A non-zero primary VID means that all MEPs created within this MA will be created as VLAN MEPs. A given MEP
may be configured with another VLAN than the MA's primary VID, but it is impossible to have untagged VLAN
MEPs.
CCM
Interval
: The CCM rate of all MEPs bound to this Service.
TLV option select
:
Sender Id
: Default Sender ID TLV format to be used in CCMs generated by this Service.
None
: Do not include Sender ID TLVs.
Chassis
: Enable Sender ID TLV and send Chassis ID (MAC Address).
Manage
: Enable Sender ID TLV and send Management address (IPv4 Address).
ChassisManage
: Enable Sender ID TLV and send both Chassis ID (MAC Address) and Management
Address (IPv4 Address).
Defer
: Let the Domain configuration decide if Sender ID TLVs will be included.
Port Status
: Include or exclude Port Status TLV in CCMs generated by this Service or let higher level determine.
Disable
: Do not include Port Status TLVs.
Enable
: Include Port Status TLVs.
Defer
: Let the Domain configuration decide if Port Status TLVs will be included.
Interface Status
: Include or exclude Interface Status TLV in CCMs generated by this Service or let higher level
determine.
Disable
: Do not include Interface Status TLVs.
Enable
: Include Interface Status TLVs.
Defer
: Let the Domain configuration decide if Interface Status TLVs will be included.
Org. Specific
: Exclude Organization-Specific TLV in CCMs generated by this Service or let higher level determine.
Disable
: Do not include Organization-Specific TLVs.
Defer
: Let the Domain configuration decide if Organization-Specific TLVs will be included.
