DES-6500
19
IGMP S
NOOPING
C
OMMANDS
The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command Parameters
config igmp_snooping
<vlan_name 32>
all
host_timeout <sec 1-16711450>
router_timeout <sec 1-16711450>
leave_timer <sec 1-16711450>
state [enabled|disabled]
config igmp_snooping querier
<vlan_name 32>
all
query_interval <sec 1-65535>
max_response_time <sec 1-25>
robustness_variable <value 1-255>
last_member_query_interval <sec 1-25>
state [enabled|disabled]
config router_ports
<vlan_name 32> [add|delete]
<portlist>
enable igmp_snooping
{forward_mcrouter_only}
show igmp_snooping
{vlan <vlan_name 32>}
disable igmp_snooping
{forward_mcrouter_only}
show igmp_snooping group
{vlan <vlan_name 32>}
show router ports
vlan <vlan_name 32>
static
dynamic
forbidden
show igmp_snooping forwarding
{vlan<vlan_name 32>}
Each command is listed, in detail, in the following sections.
config igmp_snooping
Purpose
Used to configure IGMP snooping on the switch.
Syntax
config igmp_snooping [<vlan_name 32>|all] {host_timeout
<sec>|router_timeout <sec>|leave_timer <sec>|state
[enabled|disabled]}
Description
This command allows you to configure IGMP snooping on the switch.
Parameters
<vlan_name 32>
−
The name of the VLAN for which IGMP snooping is
to be configured.
host_timeout <sec>
−
Specifies the maximum amount of time a host
can be a member of a multicast group without the switch receiving a
host membership report. The default is 260 seconds.
router_timeout <sec>
−
Specifies the maximum amount of time a route
can be a member of a multicast group without the switch receiving a
host membership report. The default is 260 seconds.
Summary of Contents for TM DES-6500
