DES-6500
create access_profile (IP)
type
−
Specifies that the Switch will examine each frame’s IGMP
Type field.
tcp
−
Specifies that the Switch will examine each frames Transport
Control Protocol (TCP) field.
src_port_mask <hex 0x0-0xffff>
−
Specifies a TCP port mask for the
source port.
dst_port_mask <hex 0x0-0xffff>
−
Specifies a TCP port mask for the
destination port.
flag_mask [all | {urg | ack | psh | rst | syn | fin}]
– Enter the
appropriate flag_mask parameter. All incoming packets have TCP
port numbers contained in them as the forwarding criterion. These
numbers have flag bits associated with them which are parts of a
packet that determine what to do with the packet. The user may
deny packets by denying certain flag bits within the packets. The
user may choose between
all
,
urg
(urgent),
ack
(acknowledgement),
psh
(push),
rst
(reset),
syn
(synchronize) and
fin
(finish).
udp
−
Specifies that the Switch will examine each frame’s Universal
Datagram Protocol (UDP) field.
src_port_mask <hex 0x0-0xffff>
−
Specifies a UDP port mask for the
source port.
dst_port_mask <hex 0x0-0xffff>
−
Specifies a UDP port mask for the
destination port.
protocol_id
−
Specifies that the Switch will examine each frame’s
Protocol ID field.
user_define <hex 0x0-0xfffffff>
−
Enter a hexidecimal value that will
identify the protocol to be discovered in the packet header.
profile_id <value 1-8>
- Specifies an index number between 1 and 8
that will identify the access profile being created with this command.
Restrictions Only
administrator-level users can issue this command.
Example usage:
DES-6500:4#create access_profile ip protocol_id profile_id 2
Command: create access_profile ip protocol_id profile_id 2
Success.
DES-6500:4#
To configure a rule for the Ethernet access profile:
config access_profile profile_id (IP)
Used to configure the IP access profile on the Switch and to define
specific values for the rules that will be used to by the Switch to
determine if a given packet should be forwarded or filtered. Masks
entered using the
create access_profile
command will be
combined, using a logical AND operational method, with the values
the Switch finds in the specified frame header fields.
config access_profile profile_id <value 1-8> [add access_id <value
1-100> ip {vlan <vlan_name 32> | source_ip <ipaddr> |
destination_ip <ipaddr> | dscp <value 0-63> | [icmp {type <value 0-
255> code <value 0-255>} | igmp {type <value 0-255>} | tcp
{src_port <value 0-65535> | dst_port <value 0-65535> | urg | ack |
psh | rst | syn | fin} | udp {src_port <value 0-65535> | dst_port <value
0-65535>} | protocol_id <value 0 - 255> {user_define <hex 0x0-
0xffffffff>}]} port <port> [permit {priority <value 0-7> {replace_priority}
Purpose
Syntax
Summary of Contents for TM DES-6500
