Example Usage:
To add a single static address 10.48.74.121 , mask 255.0.0.0 and gateway 10.1.1.254 to the routing table:
DES-6500:4#create iproute 10.48.74.121/255.0.0.0 10.1.1.254 1
Command: create iproute 10.48.74.121/8 10.1.1.254 1
Success.
DES-6500:4#
delete iproute
Purpose
Used to delete an IP route entry from the switch’s IP routing table.
Syntax
delete iproute [default | <network_address>]
Description
This command will delete an existing entry from the switch’s IP routing
table.
Parameters
default
−
deletes a default IP route entry.
<network_address>
−
IP address and netmask of the IP interface that is
the destination of the route. You can specify the address and mask
information using the traditional format (for example, 10.1.2.3/255.0.0.0 or
in CIDR format, 10.1.2.3/8).
Restrictions Only
administrator-level users can issue this command.
Example Usage:
To delete a static address 10.48.75.121, mask 255.0.0.0 from the routing table:
DES-6500:4#delete iproute 10.48.74.121/255.0.0.0
Command: delete iproute 10.48.74.121/8
Success.
DES-6500:4#
show iproute
Purpose
Used to display the switch’s current IP routing table.
Syntax
show iproute {<network_address>} {static | rip | ospf}
Description
This command will display the switch’s current IP routing table.
Summary of Contents for TM DES-6500
