27
IGMP C
OMMANDS
The IGMP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config igmp
ipif <ipif_name 12>
all
version <value 1-2>
query_interval <1-65535 sec>
max_response_time <1-25 sec>
robustness_variable <value 1-255>
last_member_query_interval <value 1-25>
state [enabled/disabled]
show igmp
ipif <ipif_name 12>
show igmp group
group <group>
ipif <ipif_name 12>
Each command is listed, in detail, in the following sections.
config igmp
Purpose
Used to configure IGMP on the switch.
Syntax
config igmp [<ipif_name 12>/all] {version <value 1-
2>/query_interval <sec 1 - 65535>/max_response_time < sec 1-25>/
robustness_variable <value 1-255>/last_member_query_interval
<value 1-25>/state [enabled/disabled]}
Description
This command is used to configure IGMP on the switch.
Parameters
<ipif_name 12>
−
The name of the IP interface for which you want to
configure IGMP.
all
−
Specifies all the IP interfaces on the switch.
version <value 1-2>
−
The IGMP version number.
query_interval <1-65535 sec>
−
The time in seconds between general
query transmissions, in seconds.
max_response_time <1-25 sec>
−
the maximum time in seconds that
the switch will wait for reports from members.
robustness_variable <value1-255>
−
the permitted packet loss that
guarantees IGMP.
last_member_query_interval <value1-25>
−
the Max Response Time
inserted into Group-Specific Queries sent in response to Leave Group
messages, and is also the amount of time between Group-Specific
Query messages. The default is 1 second
state [enabled/disabled]
−
Enables or disables IGMP for the specified IP
interface.
Restrictions Only
administrator-level users can issue this command.
Example Usage:
Summary of Contents for TM DES-6500
