LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 107 of 273
+CGCONTRDP – PDP Context Read Dynamic Parameters
<p_cid>
- a numeric parameter specifies a particular non secondary PDP context
definition. The parameter is local to the TE-MT interface and used in other PDP
context-related commands.
<bearer_id>
- a numeric parameter identifies the bearer, EPS Bearer in EPS and
NSAPI in UMTS/GPRS.
<APN>
- a string parameter which is a logical name that was used to select the
GGSN or the external packet data network.
<ip_addr>
- a string parameter shows the IP Address of the MT. The string is
given as dot-separated numeric (0-255) parameters in the form:
"a1.a2.a3.a4" for IPv4 or "a1.a2.a3.a4.a5.a6.a7.a8" for IPv6.
If the MT has dual stack capabilities the string shows first the dot separated IPv4
Address followed by the dot separated IPv6 Global Prefix Address. The IPv4
address and the IPv6 address parameters are separated by one space:
"a1.a2.a3.a4 a1:a2:a3:a4:a5:a6:a7:a8"
<subnet_mask>
- a string parameter shows the subnet mask for the IP Address of
the MT. The string is given as dot-separated numeric (0-255) parameters.
If the MT has dual stack capabilities the string shows the dot separated IPV4 subnet
mask followed by the dot separated IPV6 subnet mask. The subnet masks are
separates by space.
<gw_addr>
- a string parameter shows the Gateway Address of the MT. The string
is given as dot-separated numeric (0-255) parameters.
If the MT has dual stack capabilities the parameter shows first the dot separated
IPV4 Gateway address followed by the dot separated IPV6 Gateway Address. The
gateway addresses are separated by one space.
<DNS_prim_addr>
- a string parameter which shows the IP Address of the
primary DNS Server. If the MT has dual stack capabilities the parameter shows first
the dot separated IPV4 Address, followed by the dot separated IPV6 Address of
DNS Server.
<DNS_sec_addr>
- a string parameter which shows the IP address of the secondary
DNS Server. If the MT has
dual stack capabilities the parameter shows first the dot separated IPV4 Address,
followed by the dot separated IPV6 Address of DNS Server.
<P_CSCF_prim_addr>
- a string parameter which shows the IP Address of the
primary P-CSCF Server. If the MT has dual stack capabilities the parameter shows
first the dot separated IPV4 Address, followed by the dot separated IPV6 primary
Address of P-CSCF Server.
<P_CSCF_sec_addr>
- a string parameter which shows the IP Address of the
secondary P-CSCF Server. If the MT has dual stack capabilities the parameter
shows first the dot separated IPV4 Address, followed by the dot separated IPV6
Address of P-CSCF Server.
AT+CGCONTRDP=?
+CGCONTRDP
: (list of <p_cid>s associated with active contexts)
Reference
3GPP TS 27.007; 3GPP TS 03.60/23.060
+CGSCONTRDP – Secondary PDP Context Read Dynamic Parameters
AT+CGSCONTRDP
Possible response(s):
Summary of Contents for LE910-SKG
Page 1: ......
