LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 76 of 273
+CPBS - Select Phonebook Memory Storage
AT+CPBS=
<storage>
Set command selects phonebook memory storage
<storage>
, which will be used by
other phonebook commands.
Parameter:
<storage>
"SM" - SIM phonebook
"FD" - SIM fixed dialling-phonebook (only phase 2/2+ SIM)
"LD" - SIM last-dialling-phonebook (
/+CPBW is not applicable for this
storage)
"MC" - device missed (unanswered received) calls list (
for this storage)
"RC" - ME received calls list (
is not applicable for this storage).
"MB" - mailbox numbers stored on SIM; it is possible to select this storage only
if the mailbox service is provided by the SIM (see #MBN).
"DC" - MT dialled calls list
"ME" - MT phonebook
"EN" - SIM/USIM (or MT) emergency number (+CPBW is not be applicable for
this storage)
"ON" - SIM (or MT) own numbers (MSI torage may be available through
+CNUM also).
"SD" - SIM Service Dialling Numbers (SDN) phonebook (+CPBW is not
applicable for this storage).
<password>: string type value representing the PIN2-code required when selecting
PIN2-code locked <storage> above "FD
Note: If
“SM”
is the currently selected phonebook, selecting
”FD”
phonebook with
“
AT+CPBS=”FD”
” command simply selects the FDN as the phonebook
upon which all subsequent
+CPBW, +CPBF
and
+CPBR
commands act; the
command does not deactivate “SM” phonebook, and does not activate FDN
Note: if
<password>
parameter is given, PIN2 will be verified, even if it is not
required, i.e. it has already been inserted and verified during current session
AT+CPBS?
Read command returns the actual values of the parameter
<storage>
, the number of
occupied records
<used>
and the maximum index number
<total>
, in the format:
+CPBS: <storage>
,
<used>
,
<total>
Note: For
<storage>=”MC”
: if there are more than one missed calls from the same
number the read command will return only the last call.
AT+CPBS=?
Test command
returns the supported range of values for the parameters
<storage>
.
Example
AT+CPBS=”SM”
current phonebook storage is SIM
AT+CPBR=1
+CPBR: 1,"0105872928",129,"James"
OK
Reference
3GPP TS 27.007
Summary of Contents for LE910-SKG
Page 1: ......
