LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 253 of 273
#TCPATRUNCFG – Set TCP AT Run Service Parameters
Determines the authentication procedure in server mode:
0 – when connection is up, username and password (in this order and
each of them followed by a Carriage Return) have to be sent to the
module before the first AT command. (default)
1 – when connection is up, the user receives a request for username
and, if username is correct, a request for password. Then a message
of “Login successful” will close authentication phase.
Note: if username and/or password are not allowed (see
AT#TCPATRUNAUTH
) the connection will close immediately.
<retryCnt>
in client mode, at boot or after a socket disconnection, this parameter represents
the number of attempts that are made in order to re-connect to the Host.
Default: 0. Range 0…5.
<retryDelay>
in client mode, delay between one attempt and the other. In minutes.
Default: 2. Range 1…3600.
Note: the current settings are stored in NVM.
Note: to start automatically the service when the module is powered-on, the
automatic PDP context activation has to be set (see
AT#SGACTCFG
command).
Note : the set command returns ERROR if the command
AT#TCPATRUNL
?
returns 1 as <
mod
> parameter or the command
AT#TCPATRUND
? returns 1
as <
mod
> parameter
AT#TCPATRUNCFG?
Read command returns the current settings of parameters in the format:
#TCPATRUNCFG:
<connId>,<instance>,<tcpPort>,<tcpHostPort>,<tcpHost>,<urcmod>,<time
out>,<authMode>,<retryCnt>,<retryDelay>
AT#TCPATRUNCFG=?
Test command returns the supported values for the TCPATRUNCFG
parameters.
#TCPATRUNL – Enables TCP AT Run Service in listen (server) mode
AT#TCPATRUNL=
<mod>
Set command enables/disables the TCP AT RUN service in server mode. When this
service is enabled, the module tries to put itself in TCP listen state.
Parameter:
<mod >
0 – Service Disabled
1 – Service Enabled
Summary of Contents for LE910-SKG
Page 1: ......
