LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 244 of 273
#STGI - SIM Tookit Get Information
if
<cmdType>=17
(SEND SS)
if
<cmdType>=18
(SEND USSD)
if
<cmdType>=19
(SEND SHORT MESSAGE)
if
<cmdType>=20
(SEND DTMF)
if
<cmdType>=32
(PLAY TONE) (not supported)
if
<cmdType>=40
(SET UP IDLE MODE TEXT)
#STGI: <cmdType>[,<text>]
where:
<text>
- text to be displayed to user
if
<cmdType>=33
(DISPLAY TEXT)
#STGI: <cmdType>,<cmdDetails>[,<text>]
where:
<cmdDetails>
- unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1
:
0 - normal priority
1 - high priority
bits 2 to 7
: reserved for future use
bit 8
:
0 - clear message after a delay
1 - wait for user to clear message
<text>
- text to be displayed to user
if
<cmdType>=34
(GET INKEY)
#STGI: <cmdType>,<cmdDetails>,<text>
where:
<cmdDetails>
- unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1
:
0 - Digits only (0-9, *, # and +)
1 - Alphabet set;
bit 2
:
0 - SMS default alphabet (GSM character set)
1 - UCS2 alphabet
bit 3
:
0 - Character sets defined by bit 1 and bit 2 are enabled
1 - Character sets defined by bit 1 and bit 2 are disabled and the "Yes/No"
response is requested
Summary of Contents for LE910-SKG
Page 1: ......
