LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 183 of 273
#SCFG - Socket Configuration
#SCFGEXT - Socket Configuration Extended
AT#SCFGEXT=
<connId>,
<srMode>,
<dataMode>,
<keepalive>
[,<ListenAutoRsp>
[,<sendDataMode>]]
Set command sets the socket configuration extended parameters.
Parameters:
<connId>
- socket connection identifier
1..6
<srMode>
-
SRing
URC mode
0 - normal mode (default):
SRING : <connId>
where:
<connId>
- socket connection identifier, as before
1 - data amount mode:
SRING : <connId>,<recData>
where:
<connId>
- as before
<recData>
- amount of data received on the socket connection
2 - data view mode:
SRING : <connId>,<recData>,<data>
where:
<connId>
-
<recData>
- as before
<data>
- received data; the presentation format depens on the
subparameter
<dataMode>
value
3 – Data view with UDP datagram informations:
SRING : <sourceIP>,<sourcePort><connId>,<recData>,
<dataLeft>,<data>
same as before with <sourceIP>,<sourcePort> and <dataLeft> that means the
number of bytes left in the UDP datagram
<dataMode>
- “data view mode” presentation format
0 - data represented as text (default)
1 - data represented as sequence of hexadecimal numbers (from 00 to FF)
<keepalive> - TCP keepalive
timer timeout
0 -
TCP keepalive
timer is deactivated (default)
1..240 -
TCP keepalive
timer timeout in minutes
<ListenAutoRsp>
- Set the listen auto-response mode, that affects the commands
AT#SL and AT#SLUDP
0 - Deactivated (default)
1 – Activated
<sendDataMode> -
data mode for sending data
in command mode(AT#SSEND)
0 - data represented as text (default)
Summary of Contents for LE910-SKG
Page 1: ......
