LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 243 of 273
#STGI - SIM Tookit Get Information
#STGI: <cmdType>,<refresh type>
where:
<refresh type>
0 - SIM Initialization and Full File Change Notification;
1 - File Change Notification;
2 - SIM Initialization and File Change Notification;
3 - SIM Initialization;
4 - SIM Reset
if
<cmdType>=5
(SET UP EVENT LIST)
#STGI: <cmdType>,<event list mask>
where:
<event list mask>
- hexadecimal number representing the list of events to monitor
(see 3GPP TS 31.111):
- '00' = MT call
- '01' = Call connected
- '02' = Call disconnected
- '03' = Location status
- '04' = User activity
- '05' = Idle screen available
- '06' = Card reader status (if class "a" is supported)
- '07' = Language selection
- '08' = Browser Termination (if class "c" is supported)
- '09' = Data available (if class "e" is supported)
- '0A' = Channel status (if class "e" is supported)
The hexadecimal number is actually a bit mask, where each bit, when set, indicates
that the corresponding event has to be monitored (e.g., )
if
<cmdType>=16
(SET UP CALL)
#STGI: <cmdType>,<cmdDetails>,[<confirmationText>],
<calledNumber>
where:
<cmdDetails>
- unsigned integer, used as an enumeration
0 - Set up call, but only if not currently busy on another call
1 - Set up call, but only if not currently busy on another call, with redial
2 - Set up call, putting all other calls (if any) on hold
3 - Set up call, putting all other calls (if any) on hold, with redial
4 - Set up call, disconnecting all other calls (if any)
5 - Set up call, disconnecting all other calls (if any), with redial
<confirmationText>
- string for user confirmation stage
<calledNumber>
- string containing called number
Summary of Contents for LE910-SKG
Page 1: ......
