LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 255 of 273
#TCPATRUNFRWL – TCP AT Run Firewall List
If criteria is matched, then the packet is accepted and the rule scan is finished;
if criteria is not matched for any chain the packet is silently dropped.
Note: A maximum of 5 firewall can be present at same time in the List.
Note: the firewall list is saved in NVM
AT#TCPATRUNFRWL?
Read command reports the list of all ACCEPT chain rules registered in the
firewall setting in the format:
#TCPATRUNFRWL: <ip_addr>,<net_mask>
#TCPATRUNFRWL: <ip_addr>,<net_mask>
…
OK
AT#TCPATRUNFRWL=
?
Test command returns the allowed values for parameter <
action
>.
#TCPATRUNAUTH – TCP AT Run Authentication Parameters List
AT#TCPATRUNAUTH=
<action>,
<userid>,
<passw>
Execution command controls the authentication parameters for the
TCPATRUN connection
Parameters:
<action>
Command action
0 – remove selected chain
1 – add an
ACCEPT
chain
2 – remove all chains (
DROP
everything);
<
userid
> and <
passw
> has no meaning in this case.
<
userid
>
User to be added into the
ACCEPT
chain;
string type, maximum length 50
<
passw
>
Password of the user on the <
userid
>;
string type, maximum length 50
Command returns
OK
result code if successful.
Note: A maximum of 3 entry (password and userid) can be present at same
time in the List.
Note: The Authentication Parameters List is saved in NVM.
AT#TCPATRUNAUTH?
Read command reports the list of all ACCEPT chain rules registered in the
firewall setting in the format:
#TCPATRUNAUTH: <userid>,<passw>
Summary of Contents for LE910-SKG
Page 1: ......
