LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 239 of 273
#STIA - SIM Tookit Interface Activation
2 - SIM Initialization and File Change Notification;
3 - SIM Initialization;
4 - SIM Reset
In this case neither #STGI nor #STSR commands are required:
AT#STGI
is accepted anyway.
AT#STSR=<cmdType>,0
will answer
OK
but do nothing.
if
<cmdType>=17
(SEND SS)
if
<cmdType>=19
(SEND SHORT MESSAGE)
if
<cmdType>=20
(SEND DTMF)
if
<cmdType>=32
(PLAY TONE) (
not supported)
an unsolicited notification will be sent if allowed by SIM (see 3GPP TS
31.114):
#STN: <cmdType>[,<text>]
where:
<text>
- (optional) text to be displayed to user
In these cases neither #STGI nor #STSR commands are required:
AT#STGI
is accepted anyway.
AT#STSR=<cmdType>,0
will answer
OK
but do nothing.
In case of SEND SHORT MESSAGE (
<cmdType>
=19) command if sending
to network fails an unsolicited notification will be sent
#STN: 119
if
<cmdType>=33
(DISPLAY TEXT)
an unsolicited notification will be sent if allowed by SIM (see 3GPP TS
31.114):
#STN: <cmdType>,<cmdDetails>[,<text>]
where:
<cmdDetails>
- unsigned Integer used as a bit field.
0..255 - used as a bit field:
bit 1
:
0 - normal priority
1 - high priority
bits 2 to 7
: reserved for future use
bit 8
:
Summary of Contents for LE910-SKG
Page 1: ......
