LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 173 of 273
#CDORM – Dormant Control Command
#CDORM
:<unsolicited_status>[,<call_id>,
<dormant_status>][<CR><LF>
#CDORM
:<unsolicited_status>,<call_id>,
<dormant_status>[…]]
OK
Where: <unsolicited_status>
0 - Disabled unsolicited indication (default)
1 Enabled unsolicited indication
AT#CDORM=?
The test command returns the possible ranges of <action> and <call_id>
#NWEN - Network Emergency Number Update
AT#NWEN=[<en>]
Set command enables/disables URC of emergency number update.
Parameters:
<en>
0 - disables URC of emergency number update (factory default)
1 - enables URC of emergency number update
#NWEN: <type>
where:
<type>
1 – number list update from internal ME
2 – number list update from SIM
3 – number list update from network
Note:
<en>
is saved in NVM.
AT#NWEN?
Read command reports whether URC of network emergency number update is
currently enabled or not:
#NWEN: <en>
AT#NWEN=?
Test command returns supported values of parameter
<en>
#LTEDS – Read current network status in E-UTRAN
AT#LTEDS
Execution command reports informations about E-UTRAN network status
#LTEDS:
<EARFCN(DL/UL)>,<BAND>,<BW>,<PLMN>,<TAC>,<CELL(Physical
Cell ID)>,<ESMCAUSE>,<DRX>,<RSRP>,<RSRQ>,<RSSI>,<L2W>,<RI>,
<CQI>,<STATUS>,<SUBSTATUS>,<RRC>,<SVC>,<SINR>,<TXPWR>,<TMSI>
,<IP>,<AVGRSRP>,<ANTBAR> [CR,LF] [CR,LF]
Parameter
E-UTRAN Example
description
EARFCN(DL/
2500/20500
E-UTRAN Absolute Radio Frequency
Summary of Contents for LE910-SKG
Page 1: ......
