LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 186 of 273
#SCFGEXT2 - Socket Configuration Extended
available data(#SRECV or SRING mode 2), it is indicated
cause 1 for both possible FIN and RST from remote.
AT#SCFGEXT2?
Read command returns the current socket extended configuration
parameters values for all the six sockets, in the format:
#SCFGEXT2: <connId1>,<bufferStart1>,<abortConnAttempt>,0,0,0
<CR><LF>
...
#SCFGEXT2: <connId1>,<bufferStart1>,<abortConnAttempt>,0,0,0
AT#SCFGEXT2=?
Test command returns the range of supported values for all the
subparameters
Example
AT#SCFGEXT2=1,1
OK
AT#SCFGEXT2=2,1
OK
AT#SCFGEXT2?
#SCFGEXT2: 1,1,0,0,0,0
#SCFGEXT2: 2,1,0,0,0,0
#SCFGEXT2: 3,0,0,0,0,0
#SCFGEXT2: 4,0,0,0,0,0
#SCFGEXT2: 5,0,0,0,0,0
#SCFGEXT2: 6,0,0,0,0,0
OK
AT#SCFG?
#SCFG: 1,1,300,90,600,50
#SCFG: 2,1,300,90,600,50
#SCFG: 3,1,300,90,600,50
#SCFG: 4,2,300,90,600,50
#SCFG: 5,2,300,90,600,50
#SCFG: 6,2,300,90,600,50
OK
AT#SCFG=1,1,300,90,600,30
OK
Current configuration: socket with connId 1 and 2 are configured with new
transmission timer behaviour.
<txTo> corresponding value has been changed (#SCFG) for connId 1, for connId 2
has been left to default value.
Summary of Contents for LE910-SKG
Page 1: ......
