Filtering/QoS Information
GR2K-GA-0014
1-59
Ver. 07-02
[-min_rate <kbps> [-min_rate_burst <Byte>]]} ]
[-index <No.>]
[-replace_exp <Value>]
[-replace_user_priority <No.>]
[ { [-priority <No.>][-discard <No.>]
[{-penalty_drop | -penalty_discard <No.> | -group <No.>}] }
| { -replace_dscp <DSCP_Value>
[{-penalty_drop | -penalty_dscp <DSCP_Value>}] }
| { -dscp_map [{-penalty_drop | -penalty_dscp <DSCP_Value>}] }] ]
[Normal packet flow detecting condition] and [Important packet flow detecting
condition]
1. When all high order protocol is target.
ip <IP_Source> <IP_Destination> [{dscp <DSCP_Value> | precedence
<precedence_Value>}] [{upper| lower} <Length>] [exp <Value>]
[user_priority <No.>]
2. When the high order protocol is other than TCP, UDP, ICMP and IGMP.
<protocol No.> <IP_Source> <IP_Destination> [{dscp <DSCP_Value> |
precedence <precedence_Value>}] [{upper| lower} <Length>] [user_priority
<No.>]
3. When the high order protocol is TCP, UDP.
{tcp| udp} <IP_Source> [<port_source>] <IP_Destination>
[<port_destination>] [{dscp <DSCP_Value> | precedence
<precedence_Value>}] [{upper| lower} <Length>] [user_priority <No.>]
4. When the high order protocol is ICMP.
icmp <IP_Source> <IP_Destination> [<ICMP_Type> [<ICMP_Code>]] [{dscp
<DSCP_Value> | precedence <precedence_Value>}] [{upper| lower} <Length>]
[user_priority <No.>]
5. When the high order protocol is IGMP.
igmp <IP_Source> <IP_Destination> [<IGMP_Type>] [{dscp <DSCP_Value> |
precedence <precedence_Value>}] [{upper| lower} <Length>]
[user_priority <No.>]
*
Note: 1: If the {normal packet flow detecting condition}, [premium {important packet flow
detecting condition}], and the operation specification (*1) are set or changed
simultaneously, input the operation specification after having input the {normal packet
flow detecting condition}, and [premium {important packet flow detecting condition}].
2: When any parameter in the {normal packet flow detecting condition}, [premium
{important packet flow detecting condition}] must be changed. Input all the flow detecting
conditions and the operation specification again.
*1: If the "flow detecting condition" and the operation designation