Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-150
GR2K-GA-0014
Ver. 07-02
2. Modifying parameters:
To modify queueB bandwidth for queue1 and queue2 to 10 percent and 90
percent, respectively:
a. Change the maximum limitation band of queue number 2 in queue list name
QUEUEF, whose queue mode is set to the band control (traffic designation),
from 9 Mbit/s to 5 Mbit/s.
3. Displaying settings:
a. To display all settings:
b. To display any queue list name:
(config)#show qos-queue-list queueB
qos_queue-list queueB bandwidth {
queue1 bandwidth 20;
queue2 bandwidth 80;
};
(config)#qos-queue-list queueB -bandwidth -queue1_bandwidth
10 -queue2_bandwidth 90
(config)#show qos-queue-list queueB
qos_queue-list queueB bandwidth {
queue1 bandwidth 10;
queue2 bandwidth 90;
};
(config)#
(config)# show qos-queue-list QUEUEF
qos_queue_list QUEUEF bandwidth_traffic 100000 {
traffic 1 constant peak_rate 1000;
traffic 2 guarantee peak_rate 9000 min_rate 1500;
traffic 3 guarantee peak_rate 9000 min_rate 6000;
};
(config)# qos-queue-list QUEUEF -traffic 2 -peak_rate 5000
(config)# show qos-queue-list QUEUEF
qos_queue_list QUEUEF bandwidth_traffic 100000 {
traffic 1 constant peak_rate 1000;
traffic 2 guarantee peak_rate 5000 min_rate 1500;
traffic 3 guarantee peak_rate 9000 min_rate 6000;
};
(config)#
(config)#show qos-queue-list
qos_queue_list queueA priority ;
qos_queue_list queueB bandwidth {
queue1 bandwidth 10;
queue2 bandwidth 20;
};
qos_queue_list queueC round_robin;
(config)#
(config)#show qos-queue-list queueA
qos_queue_list queueA priority;
(config)#