Filtering/QoS Information
GR2K-GA-0014
1-205
Ver. 07-02
1.2.9
qos-ipx
Sets IPX QoS settings. A maximum of 160 entries can be generated per device.
Input Format
Settings
[set] qos-ipx {<Line Name> | <DLCI Name> | <VC Name> | <Group Name> |
<Timeslot Name> | <Peer Name> } [-priority_class <No.>],[-discard_class
<No.>]
Change settings
[set] qos-ipx {<Line Name> | <DLCI Name> | <VC Name> | <Group Name> |
<Timeslot Name> | <Peer Name> } [-priority_class <No.>],[-discard_class
<No.>]
Delete settings
delete qos-ipx {<Line Name> | <DLCI Name> | <VC Name> | <Group Name> |
<Timeslot Name> | <Peer Name> }
Display settings
show qos-ipx [{<Line Name> | <DLCI Name> | <VC Name> | <Group Name> |
<Timeslot Name> | <Peer Name> }]
Parameters
{ <Line Name> | <DLCI Name> | <VC Name> | <Group Name> | <Timeslot Name> |
<Peer Name> }
Description:
This parameter sets the relevant interface name established in
the IPX routing interface settings. (Before entering this
command, establish the IPX routing interface settings.)
Default:
Cannot be omitted
-priority_class <No.>
Description:
This parameter sets the output priority class. In the case of
output priority control, used as output priority class. In the
case of bandwidth and the round-robin, used as the queue
number.
Default:
4
Range of value:
1-8
-discard_class <No.>
Description:
This parameter sets the queuing priority class.
Default:
4
Range of value:
1-4