Filtering/QoS Information
GR2K-GA-0014
1-213
Ver. 07-02
If the queuing mode is not omitted
llq+3wfq <Rate1>% [<Length1>] <Rate2>% [<Length2>]
<Rate3>% [<Length3>]
{ 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% }
[<Length4>]
If the queuing mode is omitted
[<Rate1>% [<Length1>] [<Rate2>% [<Length2>]
[<Rate3>%[<Length3>]
[{ 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% }
[<Length4>]]]]]
3. In the case of weighted fair queuing (4WFQ):
If the queuing mode is not omitted
4wfq <Rate1>% [<Length1>] <Rate2>% [<Length2>]
<Rate3>% [<Length3>] <Rate4>% [<Length4>]
If the queuing mode is omitted
[<Rate1>% [<Length1>] [<Rate2>% [<Length2>]
[<Rate3>% [<Length3>] [<Rate4>% [<Length4>]]]]]
Deleting settings:
delete shaper [rate_limited_queueing <VLAN Name>]
delete shaper [-set_default_user_priority_off |
-set_default_user_priority]
Displaying settings:
show shaper [rate_limited_queueing <VLAN Name>]
Parameters
[{ -set_default_user_priority | -set_defaulet_user_priority_off}]
-set_default_user_priority:
Rewrites user priority in Tag-VLAN to default 0 and sends.
-set_default_user_priority_off:
Sends by the set user priority by the "flow qos" command
Default:
-set_default_user_priority
Range of value:
None
rate_limited_queueing
Sets fixed bandwidth
<VLAN Name>
Sets VLAN line name set by configuration definition
peak_rate {<kbit/s> | <Mbit/s>M}
Sets the maximum bandwidth
Description:
None
Default:
In the case of kbit/s is specified: 500 to 980000
In the case of Mbit/s is specified: 1M to 980M