Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-138
GR2K-GA-0014
Ver. 07-02
1.2.2
qos-queue-list
This command assigns a name to the QoS queue list, defines the QoS mode (priority,
round-robin, or bandwidth), and allocates bandwidth when QoS mode is set for
bandwidth. A maximum of 256 entries may be created for each RP.
Input Format
Setting/modifying information
[set] qos-queue-list <Queue List Name>
[{-priority | -round_robin | -bandwidth | -equal_bandwidth
[-queue_number <Queue Number>] | -bandwidth_kbps |
-bandwidth_traffic <kbps>}]
[{[-queue1_bandwidth <Rate>][-queue2_bandwidth <Rate>]
[-queue3_bandwidth <Rate>][-queue4_bandwidth <Rate>]
[-queue5_bandwidth <Rate>][-queue6_bandwidth <Rate>]
[-queue7_bandwidth <Rate>][-queue8_bandwidth <Rate>]
[-queue9_bandwidth <Rate>][-queue10_bandwidth <Rate>]
[-queue11_bandwidth <Rate>][-queue12_bandwidth <Rate>]
[-queue13_bandwidth <Rate>][-queue14_bandwidth <Rate>]
[-queue15_bandwidth <Rate>][-queue16_bandwidth <Rate>]}]
[{-max_queue_number_4 |-max_queue_number_8
| -max_queue_number_16| -max_queue_number_32
| -max_queue_number_64| -max_queue_number_250
| -max_queue_number_1000}]
[ -queue <Queue No.>, <Queue No.> - <Queue No.>, º <min rate (kbps)>]
[-traffic <Queue No.> -constant -peak_rate <kbps>]
[-traffic <Queue No.> -guarantee -min_rate <kbps>
[-peak_rate <kbps>] [-weight <Rate>]]
Deleting information
delete qos-queue-list <Queue List Name>
Displaying information
show qos-queue-list [<Queue List Name>]
qos-tos-map
TOS-QoS conversion table information
√
√
qos-ipx
IPX QoS information
√
√
qos-bridge
Bridge QoS information
√
√
qos-hdlc-passthrough
HDLC QoS information
√
√
Table 1-66 Relationship Between QoS Command Effectiveness and Ineffectiveness
Command Name
Command Explanation
QoS Setting
qos yes
qos no
√
:
Effective,
-:
Ineffective
*1:
Depends on the flow command’s effectiveness/ineffectiveness