Filtering/QoS Information
GR2K-GA-0014
1-159
Ver. 07-02
f.
Set the parameter using the band control (traffic designation) in the Ethernet
line, NIF number zero, LINE number zero if the interface name is <VLAN
Name>, the LINE name: office1.
(config)# line office1 ethernet 0/0 -type 100m_fullduplex
(config)# qos -yes
(config)# qos-interface office1 -group 1 -peak_rate 10000
(config)# qos-interface office1 -group 1 -traffic 1 -constant -peak_rate 10
(config)# qos-interface office1 -group 1 -traffic 2 -constant -peak_rate 20
(config)# qos-interface office1 -group 1 -traffic 3 -constant -peak_rate 30
(config)# qos-interface office1 -group 1 -traffic 4 -constant -peak_rate 40
(config)# qos-interface office1 -group 2 -peak_rate 20000
(config)# qos-interface office1 -group 2 -traffic 1 -guarantee -min_rate 80
(config)# qos-interface office1 -group 2 -traffic 2 -guarantee -min_rate 60
(config)# qos-interface office1 -group 2 -traffic 3 -guarantee -min_rate 40
(config)# qos-interface office1 -group 2 -traffic 4 -guarantee -min_rate 20
(config)# show -r line office1
line center office1 0/0 type 100m_fullduplex;
qos yes {
qos-interface office1 {
group 1 peak_rate 10000 {
traffic 1 constant peak_rate 1000;
traffic 2 constant peak_rate 2000;
traffic 3 constant peak_rate 3000;
traffic 4 constant peak_rate 4000;
};
group 2 peak_rate 20000 {
traffic 1 guarantee min_rate 8000;
traffic 2 guarantee min_rate 6000;
traffic 3 guarantee min_rate 4000;
traffic 4 guarantee min_rate 2000;
};
};
(config)#