IPX/Bridge Information
GR2K-GA-0014
2-19
Ver. 07-02
Inserting settings
insert rip-filtering <No.> [-network <IPX Address>]
[-port_network <IPX Address>][{ -forward | -drop }]
[{ -output | -input }]
Deleting settings
delete rip-filtering <No.>
Displaying settings
show rip-filtering [<No.>]
Parameters
-network <IPX Address>
Description:
This parameter specifies the relevant network address. 0xffffffff
specifies an all f’s network broadcast.
Default:
0xffffffff
range of value:
0-0xffffffff
-port_network <IPX Address>
Description:
This parameter specifies the interface to be filtered by its
network address. 0xffffffff specifies an all f’s network
broadcast.
Default:
0xffffffff
Range of value:
0-0xffffffff
{ -forward | -drop }
Description:
This parameter specifies the filtering operation.
forward:
RIP
is forwarded.
drop:
RIP
is dropped.
Default:
forward
{ -output | -input }
Description:
This parameter specifies the filtering mode.
output:
Specifies
filtering to be applied when transmitting packets.
input:
Specifies filtering to be applied when receiving packets.
Default:
output
Examples
1. Setting parameters
To drop the RIP packet with network address 11111111 with a target interface in
network address 22222222:.
(config)# rip_filtering -network 11111111 -port_network
22222222 -drop -output
(config)#