Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-216
GR2K-GA-0014
Ver. 07-02
Setting VLAN2 priority control in low latency q weighted fair queuing
(LLQ+3WFQ)
Setting VLAN3 in weighted fair queuing (4WFQ)
2. Changing parameters:
Changing the maximum VLAN1 bandwidth to 30mbps
3. Displaying setting information:
Displaying all information
(config)# shaper rate_limited_queueing VLAN2 peak_rate 20000 llq+3wfq 1%
9% 40% 50%
(config)# show shaper rate_limited_queueing VLAN2
shaper {
rate_limited_queueing {
VLAN2 peak_rate 20000 llq+3wfq 1% 9% 40% 50%;
}
}
(config)#
(config)# shaper rate_limited_queueing VLAN3 peak_rate 20000 4wfq 1% 9%
40% 50%
(config)# show shaper rate_limited_queueing VLAN3
shaper {
rate_limited_queueing {
VLAN3 peak_rate 20000 4wfq 1% 9% 40% 50%;
}
}
(config)#
(config)# show shaper rate_limited_queueing VLAN1
shaper {
rate_limited_queueing {
VLAN1 peak_rate 20000 priority 800 600 400 200;
}
}
(config)# shaper rate_limited_queueing VLAN1 peak_rate 30M
(config)# show shaper rate_limited_queueing VLAN1
shaper {
rate_limited_queueing {
VLAN1 peak_rate 30M priority 800 600 400 200;
}
}
(config)#
(config)# show shaper
shaper {
set_default_user_priority;
rate_limited_queueing {
VLAN1 peak_rate 30M priority 800 600 400 200;
VLAN2 peak_rate 20000 llq+3wfq 1% 9% 90% 50%;
VLAN3 peak_rate 20000 4wfq 1% 9% 40% 50%;
}
}
(config)#