Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
2-22
GR2K-GA-0014
Ver. 07-02
Deleting settings
delete sap-filtering <No.>
Displaying settings
show sap-filtering [<No.>]
Parameters
-type <Type>
Description:
This parameter specifies the service type of the server to be
filtered using a 4-digit hexadecimal number.
Default:
0xffff
Range of value:
0-0xffff
-server_network<IPX Address>
Description:
This parameter specifies the network address of the
destination server for the SAP packet to be filtered.
0xffffffff
specifies all interfaces.
Default:
0xffffffff
Range of value:
0-0xffffffff
-port_network <IPX Address>
Description:
This parameter specifies the interface to be filtered by its
network address. 0xffffffff specifies all interfaces.
Default:
0xffffffff
Range of value:
0-0xffffffff
{ -forward | -drop }
Description:
This parameter specifies the filtering operation.
forward: SAP
is forwarded.
drop: SAP
is dropped.
Default:
forward
{ -output | -input }
Description:
This parameter specifies the filtering mode.
output:
specifies
filtering to be applied to transmitting packets.
input: s
pecifies
filtering to be applied to receiving packets.
Default:
output
Examples
1. Setting parameters
To forward the SAP information for server network address
11111111
and service
type
1111
destined for network address
22222222
:
(config)# sap_filtering -type 1111 -server_network 11111111
-port_network 22222222
-forward -output
(config)#