Filtering/QoS Information
GR2K-GA-0014
1-157
Ver. 07-02
Examples
1. Setting parameters:
a. When the interface name is
<Line Name>
: Ethernet circuit, NIF number 0,
LINE number 0, LINE name: priority on office 1 specifies the QoS queue list
name queueA:
b. When the interface name is <DLCI Name>: serial circuit, NIF number 1, LINE
number 0, line speed 9600bps, LINE name: office2, protocol: Frame Relay,
DLCI number 16, DLCI name: round-robin on dlci1 specifies the QoS queue
list name queue B:
c.
When the interface name is <Timeslot Name>: J2 circuit, NIF number 2,
LINE number 0, LINE name: office3, timeslot number 1, timeslot width 1,
timeslot name: section1, protocol : priority on PPP specifies QoS queue list
name queueC:
(config)# line office1 ethernet 0/0
(config)# qos -yes
(config)# qos-queue-list queueA -priority
(config)# qos-interface office1 -queue_list queueA
(config)# show qos-interface
qos_interface office1 queue_list queueA ;
(config)#
(config)# line office2 serial 1/0 line_speed 9.6
(config)# frame-relay office2
(config)# dlci office2 dlci1 16
(config)# qos -yes
(config)# qos-queue-list queueB -round_robin
(config)# qos-interface dlci1 -queue_list queueB
(config)# show qos-interface
qos_interface dlci1 queue_list queueB;
(config)#
(config)# line office3 j2 2/0
(config)# timeslot office3 section1 1 width 1
(config)# ppp section1
(config)# qos -yes
(config)# qos-queue-list queueC -priority
(config)# qos-interface section1 -queue_list queueC
(config)# show qos-interface
qos_interface section1 queue_list queueC;
(config)#