IPX/Bridge Information
GR2K-GA-0014
2-9
Ver. 07-02
5. Deleting parameter:
To delete the llc_network_address information of interface Department1.
Related Commands
line
ipx
Precaution
If this command is inputted in the cases where changes are made on the IP routing
protocol information, the IP multicast protocol information, and the MPLS
information, and the
apply
command is not being executed, the
apply
subcommand is
executed before the command is executed, and the changed IP routing protocol
information, IP multicast routing protocol information, and MPLS information are
reflected to the operation.
2.1.3
ipx-arp
This sets the ARP information when WAN (Frame Relay) is used.
Input Format
Setting information
[set] ipx-arp <MAC Address> {<DLCI Name> | <VC Name> | <Peer Name> }
Change settings
[set] ipx-arp <MAC Address> {<DLCI Name> | <VC Name> | <Peer Name>}
Delete settings
delete ipx-arp <MAC Address>
Display settings
show ipx-arp
Parameters
<MAC Address>
Description:
This specifies the node address (MAC address).
Default:
Cannot be omitted
Range of value:
00:00:00:00:00:01-ff:ff:ff:ff:ff:fe
(config)# show ipx-interface Department1
ipx-interface Department1 {
ethernet802_3_network_address 11111111 ;
ethernet2_network_address 22222222 ;
llc_network_address 33333333 ;
};
(config)# delete ipx-interface Department1 -llc_network_address
config show ipx-interface Department1
ipx-interface Department1 {
ethernet802_3_network_address 11111111 ;
ethernet2_network_address 22222222 ;
}