Filtering/QoS Information
GR2K-GA-0014
1-129
Ver. 07-02
-out
: Outbound (specify when filtering on transmit side of
frame)
Default:
Undefined
-filter_group <Filter-Group-Name>
Description:
Specifies the filter group name. Set the filter group information
before entering this command.
Default:
Undefined
Example
1. Set filter group name
ip1
in inbound of interface name
ether1
:
2. Set filter group name
ip1
in inbound and filter group name
ip2
in outbound of
interface name
ether1
:
3. Change the filter group name set in inbound of interface name
ether1
from
ip1
to
ip2
:
(config)#line ether1 ethernet 0/0
(config)#ip ether1 170.10.10.10/24
(config)#filter -yes
(config)#filter-list 1
(config)#filter-group ip1 1
(config)#filter-interface ether1 in –filter_group ip1
(config)#show filter-interface ether1
filter_interface ether1 in filter_group ip1;
config
(config)#line ether1 ethernet 0/0
(config)#ip ether1 170.10.10.10/24
(config)#filter -yes
(config)#filter-list 1
(config)#filter-group ip1 1
(config)#filter-interface ether1 -in –filter_group ip1
(config)#filter-interface ether1 -out –filter_group ip2
(config)#show filter-interface ether1
filter_interface ether1 in filter_group ip1;
filter_interface ether1 out filter_group ip2;
(config)#
(config)#show filter-interface ether1
filter_interface ether1 in filter_group ip1;
filter_interface ether1 out filter_group ip2;
(config)#filter-interface ether1 -in –filter_group ip2
(config)#show filter-interface ether1
filter_interface ether1 in filter_group ip2;
filter_interface ether1 out filter_group ip2;
(config)#