Cisco ASR 9000 Series Command Reference Manual Download

Page: 642 / 1138

Description

Field

The number of links on the device (from 0 to the
maximum number of supported links for the bundle)
in the format

x / y / z

, with the following values:

•

—

Number of links in Active state on the

bundle.

•

—

Number of links in Standby state on the

bundle.

•

—

Total number of links configured on the

bundle.

Local links <active/standby/configured>:

Bandwidth characteristics on the bundle in kilobits
per second (kbps) in the format

x / y

, with the

following values:

•

—

Current bandwidth of the bundle (this

effective bandwidth might be limited by
configuration).

•

—

Available bandwidth of the bundle that is

the sum of the bandwidths of all of the locally
active links.

Local bandwidth <effective/available>:

Layer 2 MAC address on the bundle interface in the
format
xxxx.xxxx.xxxx. The (

source

) of the address

is shown in parentheses with the following possible
values:

•

Interface name

—

The MAC address is from the

displayed member interface type and path.

•

Configured

—

The MAC address is explicity

configured.

•

Chassis pool

—

The MAC address is from the

available pool of addresses for the chassis.

•

[unknown MAC source 0]

—

No MAC address

could be assigned to the bundle. (You might see
this display if you have not completed your
bundle configuration.)

MAC address (source):

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x

622

Link Bundling Commands on the Cisco ASR 9000 Series Router

show bundle

Summary of Contents for ASR 9000 Series



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ASR 9000 Series

Reviews:

Related manuals for ASR 9000 Series

Brands by name

Popular brands

Cisco ASR 9000 Series, Command Reference Manual

Search results

Summary of Contents for ASR 9000 Series

Reviews:

Related manuals for ASR 9000 Series

Brands by name

Popular brands