5
5-8
UNIX server print queues
T
O
SET
UP
C
OLORWRITER
PRINTING
ON
A
UNIX
SYSTEM
RUNNING
S
OLARIS
2:
1.
On each workstation that will print to the Colorwriter, log into the UNIX system as
the root user.
2.
At the UNIX prompt, type:
lpsystem -t bsd
colorwriter
This tells your system that the Colorwriter is a print server of
bsd
(Berkeley
Software Distribution) type.
3.
Type:
lpadmin -p
colorwriter
q -s
colorwriter
!xjprint
This command creates an internal queue on the workstation and points it to the
Colorwriter. The general format of this command is:
lpadmin -p <queuename> -s <hostname>!xjprint
N
OTE
:
The name
xjprint
after the exclamation point is for configuring the
Colorwriter; it is an internal name that the Colorwriter requests. It must be
xjprint
; it is not a user-selectable name. This is the only place where it is entered.
N
OTE
:
When setting up an lpr queue to the Colorwriter, the system name for the
remote printer—
xjprint
—must be specified in lowercase letters.
4.
Type:
accept
colorwriter
q
This command tells the Colorwriter to accept print requests from your
workstation. You are now ready to print from the workstation to the Colorwriter.
If your Colorwriter has the 32MB or 48MB memory configuration, you can
create up to three independent network connections. The three internal names are
xjprint
,
xjdirect
, and
xjhold
. Each connection points to a queue on the
Colorwriter disk.
PCK
