DHCP Server CLI Commands
182
2/1553-ZAT 759 94 Uen B – December 2005
6.32
dhcpserver subnet add iprange
6.32.1 Syntax
dhcpserver subnet {<name>|<number>} add iprange
<startaddr> <endaddr>
6.32.2 Description
This command adds a pool of IP addresses to an existing subnet. DHCP
server can allocate IP addresses from this pool to clients on request.
6.32.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
subnet. To display subnet names, use
the
dhcpserver list subnets
command.
N/A
number
A number that identifies an existing
subnet. To display subnet numbers,
use the
dhcpserver list
subnets
command.
N/A
startaddr
The first IP address in the pool of
addresses. The IP address is
displayed in the following format:
192.168.102.3
N/A
endaddr
The last IP address in the pool of
addresses. The IP address is
displayed in the following format:
192.168.102.3
N/A
6.32.4 Example
-->
dhcpserver subnet sub1 add iprange 239.252.197.0
239.252.197.107