Bridge CLI Commands
2/1553-ZAT 759 94 Uen B – December 2005
51
4.16
bridge show interface
4.16.1 Syntax
bridge show interface {<name>|<number>}
4.16.2 Description
This command displays configuration settings of a named bridge interface.
The following interface information is displayed:
•
Filter
type.
•
Port
Filter.
•
Name of attached transport (if applicable).
•
Port VLAN Id (PVID) associated with the interface.
•
Acceptable Frame Type setting.
•
Ingress Filtering setting.
•
Default User Priority.
Note:
This command does not show the current contents of the bridge’s filter
table. See the command
bridge list ucastentries
or the
console command
filter
.
4.16.3 Options
The following table gives the range of values for each option which can be
specified with this command and a default value (if applicable).
Option Description
Default
value
name
A name that identifies an existing
bridge interface. To display interface
names, use the
bridge list
interfaces
command.
N/A
number
A number that identifies an existing
bridge interface. To display interface
names, use the
bridge list
interfaces
command. The
number appears in the first column
under the heading ID.
N/A